PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
January 15, 2024

400 Watt 48 volt to 12 volt DC/DC Converter Industrial Grade, with wide range input 22-60VDC

48V input DC/DC voltage converter  400W with wide input voltage range Fully isolated 400 Watt 48 volt to 12 volt DC/DC converter. Suitable for voltage conversion of automobile electronics, and telecom equipment 48V to 12V DC/DC converter, heavy duty industrial, marine and militarized
Heavy Duty, Marine, and Militarized 48V to 12V converters

48V input DC/DC converter catalog
More DC/DC converters with 48V input

For more 48 volt products from PowerStream click here:More DC/DC Converters


This common negative 400 watt, 30A DC/DC voltage converter is useful for voltage conversion to operate 12 volt electronics off 24V, 32V, 36V, and 48 volt vehicles, golf carts, fork lifts and telecom busses, best for radios, stereos, DVDs, CB radios, transmitters. This DC to DC converter closely regulates the output voltage over a range of input voltages.
"Common negative" means that the input and output grounds are connected, useful in most applications where there is a negative ground.
DC-DC Converter Heavy Duty
30 Amp
DC to DC Converter
48V to 12V  DC/DC converter, heavy duty industrial
Part Number
and Price
PSEC-382
$418
add_to_cart.gif
Input Voltage 22 to 60 VDC
Max Input current at No Load 300 mA when "on"
2mA when "off"
Output Voltage Nominal 13.6-13.8 VDC factory set, internally adjustable
Output Voltage for Standard Product 13.6 ± 0.040 VDC
Max Output Current(s) 30 Amps
Max Output Power 450 watts peak
Output current limit? Yes, electronic knee at power limit
Operating Temperature Range -40°C to +40°C no derating
Derating 1.5% per °C from 40°C to +60°C
Efficiency >96 % at full load
Line and load regulation <±40mV
Low voltage input shutdown 19-21VDC
High voltage input shutdown >64VDC
Switching frequency kHz
Output ripple noise <50 mV rms
Remote power on/off No
Input Fuse Yes, replaceable
Connections Input: Screw Terminal Block, Magum 602-3
Output: Screw Terminal Block, Magum 602-3
Protection Over Voltage , Over Current, Short Circuit , Reverse Polarity , Over Load
Over temperature protection Yes , auto reset
Reverse polarity protection By externally replaceable fuse
Power line communcations -RF signal transparency - High-pass filters allow RF signals injected at the input terminals to pass to the output terminals giving PLC-4 compatibility.
Humidity <95% non-condensing
Altitude 6000 meters
Dimensions 198 x 175 x 91 mm (7.8 x 6.9 x 3.6 inches)
Mounting centers 7.30 x 3.38 inches
Weight 2.75 Kg (6 lbs)
Audible Noise None
Cooling Convection, no fan
Warranty 2 years

Advantages:

OEM Battery Chargers High current DC/DC voltage converter stabilizes voltage for equipment designed for automotive applications that require 12 to 13.8 volts from a 24, 32V, 36V or 48V source.

OEM Battery Chargers The PSEC-382 DC/DC Converter can be used to provide regulated 12VDC from 48 volt golf carts, fork lifts, and telecom power.

OEM Power Supplies High efficiency DC/DC Converter >96%.


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

Friday, 01-Nov-2024 13:21:52 EDT

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification