110VAC to 24VAC |
|
20W, 40W, 48W, 72W and 120W |
|
12VDC to 24VAC |
|
Inverter takes 12 volts DC directly to 24VAC in
order to run CCTV cameras and other security electronics from a solar or low
voltage DC system. |
|
12VDC to 24VAC |
|
100 watt version of the 24 VAC inverter |
100 Watt 12VDC to
24VAC inverter |
24VAC to 1V-18VDC |
|
5 Amp DC output, at 1V, 1.5V, 3.3V, 5V, 6V, 9V,
10V, 12V, 14V, 15V, up to 18V, selectable by trim pot |
|
24VAC to 5VDC |
|
5V 5A DC output, 8VAC to 30VAC input |
|
24VAC to 5VDC |
|
AC/DC switchmode converter gives you 5VDC in
24VAC systems at up to 75Watts |
|
24VAC to 12VDC |
|
AC/DC switchmode converter module gives you
12VDC in 24VAC systems at up to 20Watts |
|
24VDC to 18VAC |
|
DC/AC converter produces 18VAC in 24VDC systems
|
|
24VDC to 24VAC |
|
Inverter takes 24 volts DC directly to 24VAC in
order to run CCTV cameras and other security electronics from a solar or low
voltage DC system. |
|
24VDC to 24VAC |
|
Modified sine wave 24VAC inverter |
|
24VAC to 24VDC |
|
To get 24VDC from a 24VAC system we created a
switchmode power supply that keeps the 24VDC regulated over a large range of
24VAC input voltages. It acts like a rectifier, in that it takes AC and makes
DC, but also regulates the voltage. |
PST-ADC2424-2.5A |
24VAC to 24VAC with battery backup |
|
Battery backup for low voltage 24VAC systems
offers a UPS that runs on 24VAC and supplies 24VAC pure sine wave power in case
of power failure. |
|
24VAC Fluorescent light ballast |
|
Fluorescent light ballast for use in 24VAC
installations |
|
48VDC to 24VAC |
|
Inverter for producing 24VAC power when 48VDC
is available |
|
12VDC 24VDC 36VDC 48VDC 125VDC |
|
50VA IP66 rated inverter for extreme service,
24VAC output and -25°C to +55°C operation |
|
110VAC to 12VDC 4 channels |
|
4 channel 12 volt power supply with fused AC
outlets. The monitor can sit on top of the box. |
|