|
Batteries, Chargers, and Power Supplies, Custom
and off-the-shelf. For more battery engineering resources click here:
PowerStream offers the following prismatic lithium ion
batteries to original equipment manufacturers. Terms FOB China, payment with
order. Prices are subject to change, please inquire for current prices. 3-6
weeks delivery time. Some cells are stocked in Utah, which is indicated by "add
to cart" buttons in the table below.
Lithium ion cells are
used in a wide variety of portable equipment and instruments. Prismatic lithium
cells have a better form factor than cylindrical cells for a variety of
applications, such as cell phones, PDAs, cameras. These cells are high-quality
Chinese cells, made in an ISO certified environment. PowerStream has qualified
this factory as being one of the premier factories for prismatic Li-ion cells.
Prismatic cells are being replaced in many applications by lithium polymer
cells, which are also flat. There are more sizes available in the lithium
polymer format, and more are stocked in Utah. Lithium
Polymer Cells
Features:
1. High operating voltage(3.6V)
2. Energy density is high
3. No memory effect
4. Self-discharge is
less than 2% per month
5. Charge/discharge cycle characteristics are
excellent
6. Safety characteristics are excellent
7. The battery has
a wide discharging temperature range of -20 °C to +60 °C
Note: We don't inflate
our specifications as many companies do. The capacity in amp-hours is
guaranteed, and will be exceeded most of the time.
Note on
safety boards: The PCB or "protection circuit board" is optional, and only
included when requested. Some of our in-stock cells have the PCB installed. The
PCB prevents the cell from being over-discharged, short circuited, or exposed
to a charging voltage that is dangerous.
A typical PCB data sheet is shown
here.
Prismatic Lithium Ion Cells
| Size |
Dimension
T +0, -0.3
W +0,
-0.5
L +0, -0.6 mm unless otherwise stated |
Capacity
mAh |
Weight |
| |
|
|
|
| H042030S |
4.2 ×20×30 |
150-170 |
6.9 g |
| H042035S |
4.2 ×20×35 |
180-200 |
7.8g |
| H043450S |
4.3 x 34 x 50.1 |
530-550 |
14g |
| (For MP3) |
|
|
|
| H383048 |
4.1 ×30×48 |
500-550 |
22 g |
| H043040-PCB |
4.2 ×30×40 |
400-420 |
18 g |
| H043048 |
4.2 ×30×48 |
500-550 |
22 g |
| H423048 |
4.5 ×30×48 |
550-600 |
22 g |
| H053040
|
5.3 ×30×40 |
550-600 |
22 g |
| H053048-PCB |
5.3 ×30×48 |
650-700 |
26 g |
| H483448 |
4.8×34×48(+0-0.1) |
750 |
30 g |
| H053448-PCB |
4.8×34×51 |
800 |
|
| H483463 |
5.1 ×34×64 |
1050-1100 |
42 g |
| (H053465) |
|
950-1050 |
38 g |
| H552225 |
5.9(+0-0.4)×22 ×25 |
250-300 |
12 g |
| H552247 |
5.9(+0-0.4)×22 ×47 |
500 mAH |
22 g |
| H061948 |
6.3 ×19 ×48 |
450 mAH |
20 g |
| H061765 |
6.3 ×17 ×67 |
650 mAH |
26 g |
| H081765
|
8.3 ×17 ×67 |
750 mAH |
33 g |
| H622028
|
6.2 x 20 x 28 |
280 mAH |
10 g |
| H063048 |
6.3 ×30 ×48 |
800 mAH |
30 g |
| H063048-PCB |
6.3 ×30 ×48 |
800 mAH |
|
| H063465 |
6.3 ×34 ×65 |
1250-1300 |
47 g |
| H063448 |
6.3 ×34 ×48 |
900-950 |
25 g |
| H063448-PCB |
6.3 ×34 ×48 |
900-950 |
|
| H073048 |
7.5 ×30 ×48 |
850-900 |
42 g |
| H653466 |
6.5 x 33 x 66 |
1150 mAH |
42 g |
| H753448 |
7.5 ×34 ×48 |
1050-1100 |
42 g |
H083447
|
8.0×34 ×47 |
1200-1250 |
36 g |
| H083448-PCB |
8.0×34 ×48 |
1200-1250 |
|
| H103448-PCB |
10.3(+0-0.4)×34 ×48 |
1500-1550 |
50 g |
| H103463 |
10.3 x 33.7 x 63 |
1700 |
55 g |
| H103450AR-PCB |
10.3 x 33.7 x 66 |
1800 mAH |
|
| |
|
|
|
Quantity prices are based on one order, one shipment. Allow
time to ship by ocean freight from China for large quantities of lithium
containing cells and batteries.
Our inventory is continually changing, we don't stock more
than 200 pieces in Utah, delivery can take 3-6 weeks if we are out of stock.
Caution:
(1) Do not short-circuit and do not
overcharge lithium ion cells.
(2) Do not over-discharge , dent, crush, or
burn the prismatic cells.
(3) The lithium ion battery should be removed
from the instrument when battery is depleted.
(4) Do not try to solder
directly to prismatic lithium ion batteries .
(5) Do not disassemble
lithium ion batteries.
(6) Do not use lithium ion batteries outside the
specified temperature range
.
How to
connect to prismatic lithium ion cells.
Prismatic cells were
designed to be used with wire leads. Attempts to use them with printed circuit
board solder tabs, either surface-mount or through-hole, are generally not
successful. The preferred way to use them is with wires soldered to solder
tabs, which are capacitance-discharge spot welded to the battery terminals. In
turn these wires go either to the safety board or to a pin-and-socket PC board
connector to plug onto the board. From the safety board the output wires can
also be soldered directly into the circuit board, or using a pin-and-socket
connector. |
