March 5, 2025

Wall mount 2 Cell Lithium-Ion and lithium-polymer chargers 800 mA with universal AC input

Lithium-Ion Battery Pack Charger 3 cell pack

More Lithium Battery Chargers from PowerStream

Lithium-Ion Battery two cell charger 0.8Amps

Lithium-Ion Battery Chargers for OEMs.

This battery charger is a microprocessor controlled unit designed exclusively for charging 2 cell 7.2 V or 7.4 V. Lithium-ion and lithium polymer (lipo, li-po, li-poly) battery packs. It has a simple led indicator to indicate the current operating mode of the charger. This battery charger complies with applicable safety agency requirements, and it is listed with TUV and CE. This is an 8.4V peak battery charger.

PST-L0508S

For charging 2 cell lithium packs

$15.50

Quantity	1-9	10-99	100+
	$15.50	$15.00	$12.5

Optional 18" alligator cord adapter

$3.60

PST-WX12 ---- Output adapter barrel plug kit

$7.00

SDY-C53F (ZHJX002)

adapters with a barrel connector input and screw terminal output

For adapting the barrel connector version to screw terminals

$2.50 each

PST-L0508S 2 Cell Pack Li-ion Battery Charger
NO	ITEM	UNIT	SPECIFICATION	REMARK
INPUT
	Rating Input Voltage	Volts ac	100~240Vac 50/60Hz
	Input voltage range	Volts ac	90~265Vac
	Rating Input Current	Amps	0.1A rms	Test Conditions: INPUT:220V OUTPUT:Full load
	Max. input power	Watts	12 Watts
OUTPUT
	Rating output voltage	V dc	8.4V
	Output voltage range	V dc	6VDC ~ 8.5VDC
	Suitable for Battery type		7.2V LI-ION
	Constant Charge current	A	500 mA (+0.15A)
	Constant Voltage	V	8.4V (+-0.1V)
	Charge end current	A	<0.1
	Typical charge time	hour	1.5~2 hours	Test Conditions: For 1Ah Li-ion pack
	Max. output power	W	16.4W
	Hold-on time	ms	20
	Ripple current	mA	50	Test Conditions: Input: 220Vac Output: Full load
	Charge finish condition		V>8.3V + I<0.1A
	LED color		Red: charging Green: finish/idle
	Output short-circuit protect		Yes
	Efficiency	%	>70%	Test Conditions: At max. load
Environment
	Operate temperature	·C	-10 ~ +40	Full load & natural convection.
	Operate humidity	%RH	< +90	Relative humidity, non-condensing.
	Storage temperature	·C	-40 ~ +70
	Storage humidity	%RH	0 ~ +95	Relative humidity, non-condensing.
	Cooling		Natural convection
	Temperature factor	%
	Vibration resistance		5MM/50HZ/600S	Non-operating condition.
	Impact resistance		1 meter drop test >= 3 times	Non-operating condition.
Mechanical
	Weight	g	120 grams
	Size	mm	81x43x40 mm	Case only
	Connectors		5.5 x 2.1 mm barrel, others available on special order in quantity, adapter plugs available (see below)
Safety
	Max. temperature rise	·C	< 40 on casing	At any line and Max. Load
	Safety standards	TUV, CE	GB4943 UL1950 EN60950
	EMC standard		EN55022 B
	MTBF	hrs	30000
	Limited power source	VA	50
	ESD	kV	8.0
	Hi-Pot Insulation	V	i/p to o/p: 3000 (1 min.)	For final unit, cut-off current =10mA
Drawing	Drawing

Twelve optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.

2.35 OD x 0.7 ID Barrel
3.0 OD x 1.1 ID Barrel
3.5 OD x 1.35 ID Barrel
4.0 OD x 1.7 ID Barrel
4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
5.0 mm OD x 3.5 mm ID with center pin
5.5 mm OD x 1.5 mm ID type 2 Barrel
5.5 mm OD x 2.5 mm ID Barrel
6.3 OD x 3.0 ID center pin Barrel
6.0 OD x 4.4 ID center pin Barrel
7.4 mm OD x 5.0 center pin ID Barrel
7.9 OD x 5.6 ID center pin Barrel

Specifications:

Input Voltage: 100 - 240 Vac, 50/60 Hz.

Output Voltage: Up to 8.4 Vdc controlled by battery charger

Output current: up to 1.2 A ±0.1 A max., controlled by battery charger

Temperature: -10 to +45° C, Operating -40 to +70° C, non-Operating

Humidity: Indoor 90% R.H. @ 35° Celsius, Non-Condensing

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

2 cell lithium ion and li-po battery pack charger , two cell lithium pack charger, 8.4V lithium battery charger

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification