Rejuvenating function can bring sulfated batteries back to
life
cUL and CE marked
Fuel gauge keeps track of charge progress
Alligator clip output leads
You can use these safely on any size or type of 48V lead acid
batteries. Precision multistage charger For charging 48V Pb-Acid batteries at
1.7 amps. Charge lead acid, SLA, sealed lead acid, Gel, AGM and VRLA batteries
Recharges 48 Volt lead acid,
sealed lead acid, SLA, VRLA, and flooded batteries.
08
Battery charger peak current
A
1.7A±
8%
This won't hurt your battery no
matter what the battery manufacturer says is the maximum charge current, since
this is a sophisticated, precision, multistage charger.
09
Bulk Charging voltage Limit
V
57.5V ± 0.2V
10
Floating charge voltage limit
V
55.7V ± 0.2V
11
End-of-charge condition (current)
I < 0.4A ± 0.05A
12
End-of-charge condition
(voltage)
V>29V, I<0.4A
13
Maximum
output power
W
100W
14
Typical
charging time
hours
4~12 hours
For
7-20Ah VRLA battery.
15
Ripple
current
mA
100 mA
Input:
230VAC Output: Full load
16
Charge
Mode
Auto 3
stages
17
LED
indicator
Red: Power
On
No Green: No battery detected
One Green: Desulfating
Two-three green: Charging
All flashing: reverse polarity
or short circuit
Dim Red blinking: Sleep mode. The unit will
wake up when the battery voltage drops. [It is not easy to entice the charger
into going into sleep mode, so you may never see this]
18
Output
short protection
Output reverse polarity
protection
YES
YES
19
Efficiency
%
80%
At maximum load
Environment
20
Operating temperature
°C
-10 ~ +40
Full load & natural convection.
21
Operating humidity
%RH
< +90
Relative humidity, non-condensing.
22
Storage temperature
°C
-40 ~ +70
23
Storage humidity
%RH
0 ~ +95
Relative humidity, non-condensing.
24
Cooling
Natural
convection
25
Impact
test
1 meter drop test >= 3 times
Non-operating condition.
Mechanical
26
Weight
g
400
14 ounces
27
Size
mm
170 X 71 X 51 mm
Case only
28
Input/Output Cord &Terminals
Input
cord is an IEC-C7 C8 removable cord
Output is Alligator clips or 5.5 x
2.1 mm barrel connector, depending on the model
Input cord is 6 feet long Output cord is 5
feet long AWG18 zip cord