PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
July 1, 2021

800 Watt 32 or 36 volt to 12 volt DC/DC Converter, Marine Grade, with wide range input 22-60VDC, for boats and yachts with super-high efficiency

48V input DC/DC voltage converter  400W with wide input voltage range 800 watts

Fully isolated 800 Watt 36 volt to 12 volt DC/DC converter. Suitable for voltage conversion of automobile electronics, and telecom equipment
36V input DC/DC converter catalog
More DC/DC converters with 36V input

For more 36 volt products from PowerStream click here:More DC/DC Converters


This common negative 800 watt, 55A DC voltage converter is useful for voltage conversion to operate 12 volt electronics from 32V and 36V vehicles, golf carts, fork lifts and boats and yachts. Encapsulated for marine environments for radios, stereos, DVDs, CB radios, transmitters. This DC to DC converter closely regulates the output voltage over a range of input voltages.
"Common negative" means that the input and output grounds are connected, useful in most applications, especially in vehicles where there is a negative ground.
DC-DC Converter Heavy Duty
55 Amp
DC to DC Converter
48V to 12V  DC/DC converter, heavy duty industrial
Part Number
and Price
PSEC-384
$790
add_to_cart.gif
Input Voltage 32V or 36V (range 22 to 60 VDC)
Max Input current at No Load 300 mA when "on"
2mA when "off"
Output Voltage Nominal 13.6-13.8 VDC factory set, internally adjustable
Output Voltage for Standard Product 13.6 ± 0.040 VDC
Max Output Current(s) 60 Amps
Max Output Power 800 watts peak
Output current limit? Yes, electronic knee at power limit
Battery charing? Yes, will charge a 12V sealed lead acid or lithium iron phosphate battery
Operating Temperature Range -40°C to +40°C no derating
Derating 1.5% per °C from 40°C to +60°C
Efficiency >96 % at full load
Line and load regulation <±40mV
Low voltage input shutdown 19-21VDC
High voltage input shutdown >64VDC
Switching frequency kHz
Output ripple noise <50 mV rms
Remote power on/off No
Input Fuse Yes, replaceable
Connections Input: Screw Terminal Block, Magum 602-3
Output: Screw Terminal Block, Magum 602-3
Protection Over Voltage , Over Current, Short Circuit , Reverse Polarity , Over Load
Over temperature protection Yes , auto reset
Reverse polarity protection By externally replaceable fuse
Power line communcations -RF signal transparency - High-pass filters allow RF signals injected at the input terminals to pass to the output terminals giving PLC-4 compatibility.
Humidity <95% non-condensing
Altitude 6000 meters
Dimensions 350 x 175 x 91 mm (13.8 x 6.9 x 3.6 inches)
Mounting centers 13.30 x 3.38 inches
Weight 5.5 Kg (12 lbs)
Audible Noise None
Cooling Convection, no fan
Encapulation Internally encapsulated
Warranty 3 years

Advantages:

OEM Battery Chargers High current DC/DC voltage converter stabilizes voltage for equipment designed for automotive applications that require 12 to 13.8 volts from a 32V or 36V source.

OEM Battery Chargers The PSEC-382 DC/DC Converter can be used to provide regulated 12VDC from 36 trolling motor batteries, volt golf carts, fork lifts, and boats.

OEM Power Supplies High efficiency DC/DC Converter >96%.


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

Thursday, 21-Nov-2024 10:38:49 EST

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification