April 22, 2022

400 Watt 24 volt to 12 volt DC/DC Converter Industrial Grade, with wide range input 22-60VDC for marine applications, boats and yachts

24V input DC/DC voltage converter 400W with wide input voltage range

Fully isolated 400 Watt 24 volt to 12 volt DC/DC converter. Suitable for voltage conversion of automobile electronics, and telecom equipment

More DC/DC converters with 24V input

For more 24 volt products from PowerStream click here:

This common negative 400 watt, 30A DC/DC voltage converter is useful for voltage conversion to operate 12 volt electronics off 24V vehicles, golf carts, fork lifts and telecom busses, best for radios, stereos, DVDs, CB radios, transmitters. This DC to DC converter closely regulates the output voltage over a range of input voltages 22V-30V.

"Common negative" means that the input and output grounds are connected, useful in most applications where there is a negative ground.

DC-DC Converter	Heavy Duty Buck Converter 30 Amp DC to DC Converter
Part Number and Price	PSEC-362 $433
Input Voltage	22 to 60 VDC
Max Input current at No Load	300 mA when "on" 2mA when "off"
Output Voltage Nominal	13.6-13.8 VDC factory set, internally adjustable
Output Voltage for Standard Product	13.6 ± 0.040 VDC
Max Output Current(s)	30 Amps
Max Output Power	400 watts peak
Output current limit?	Yes, electronic knee at power limit
Operating Temperature Range	-40°C to +40°C no derating
Derating	1.5% per °C from 40°C to +60°C
Efficiency	>95 % at full load
Line and load regulation	<±40mV
Low voltage input shutdown	19-21VDC
High voltage input shutdown	>64VDC
Switching frequency	kHz
Output ripple noise	<50 mV rms
Remote power on/off	No
Input Fuse	Yes, replaceable
Connections	Input: Screw Terminal Block, Magum 602-3 Output: Screw Terminal Block, Magum 602-3
Protection	Over Voltage , Over Current, Short Circuit , Reverse Polarity , Over Load
Over temperature protection	Yes , auto reset
Reverse polarity protection	By externally replaceable fuse
Power line communcations	-RF signal transparency - High-pass filters allow RF signals injected at the input terminals to pass to the output terminals giving PLC-4 compatibility.
Humidity	<95% non-condensing
Altitude	6000 meters
Dimensions	198 x 175 x 91 mm (7.8 x 6.9 x 3.6 inches)
Mounting centers	7.30 x 3.38 inches
Weight	2.75 Kg (6 lbs)
Audible Noise	None
Cooling	Convection, no fan
Warranty	2 years

Advantages:

High current DC/DC voltage converter stabilizes voltage for equipment designed for automotive applications that require 12 to 13.8 volts from a 24 voltsource.

The PSEC-362 DC/DC Converter can be used to provide regulated 12VDC from 24 volt golf carts, and fork lifts.

High efficiency DC/DC Converter >95%.

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

Wednesday, 15-Jan-2025 03:21:29 EST

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification