April 26, 2024

12V to 12V regulator DC/DC converter with wide input range. Designed to keep electronics alive during engine cranking.

More 12V iinput DC/DC converters with 12VDC input and 1.5 V to 48V output

These are fully regulated switchmode power converters, designed to allow the use of sensitive 12 volt equipment in 12V vehicles. These are attractive, reliable, robust DC/DC converters good for fork lifts, off-road, military, construction and recreational equipment. They are typically used for military equipment, PLCs, laser scanners, and wherever rugged 12VDC is required. They are ultra quiet, both in the input and noise fed back into the input.

To determine the amperage you need just add up the watts of all the equipment and divide by 12 volts.
These converters are fully isolated, so can be used in any configurations.

12V/12V DC-DC Converters	Heavy Duty 20 Amp DC to DC Converter $525
Part Number and Price	PSEC-615C Allow up to 15 days for manufacturing
Input Voltage*	5V to 15VDC
Input surge	Soft-start technology
Input current	25A at 12V input and full output
Output Voltage	13.8 VDC
Max Output Current(s)	20 Amps if input voltage is above 10V 10A if input voltage is 5VDC
Max Output Power	275 watts
Max Output Power (continuous)	275 Watts
Output current limit?	Electronic knee at 300W
Operating Temperature Range	-40 °C to +40 °C with no derating (-40 °F to +104 °F)
Derating	1.5% per °C up to +60°C
Efficiency	92 % at maximum output
Max Input current at No Load	110 mA
Load Regulation	<60 mV from no load to full load
Output ripple noise	<50 mV rms
Isolation	Common negative ground >500 volts isolation from input to output and from the case to any terminal
Remote power on/off	Option
Input Fuse	AGC-10
Connections	Flying leads
Protection	Under Voltage (2.0V), Over Voltage (>17V), Over Current, Short Circuit , Reverse Polarity, Over Temperature
Load dump	Protected against load dump in vehicles
Dimensions	8.8 x 6.9 x 3.6 inches
Mounting centers	7.3 x 3.38
Cooling	Convection, no fan
Weight	6 lbs, 2.7 kg
Altitude	6000 meters
Shock and vibration	Internally encapsulated
Audible Noise	None
Specifications	Meets ISO 16750-2

*Low input voltage behavior. When the input falls below 11 volts the output voltage is no longer regulated, but will fall in voltage. At 1 amp output this drop-off starts when the input voltage is 8.3V.
The unit will turn itself off at about 7 volts, and will automatically turn back on again when the input voltage is restored.

Heavy Duty High Current Switchmode DC/DC Converters.

High efficiency.

Excellent line and load regulation.

Wide input voltage range suitable for 12 volt automotive and vehicle systems immune to engine starting voltage sags.

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification