April 26, 2024

Industrial and grade 24V to 48 volt DC-DC battery charger 25 Amp 1250 Watt for lead acid, lithium iron phosphate (16 cell) or lithium ion (14 cell)

More DC/DC battery chargers for lead acid, SLA, lithium ion and lithium iron phosphate batteries

More DC/DC battery chargers with 24V input

These robust DC input battery chargers have a wide operating temperature range, and use a DIN terminal block for input and output connections. The wide input voltage range allows use in 24V vehicle systems, and designed to allow the use of 48 volt equipment in 24 volt, vehicles, marine, military, PLC, and cell tower applications. These are attractive, reliable, robust DC/DC chargers good for fork lifts, off-road, construction and recreational equipment. They are relatively immune to vibration and shock.
To determine the output amps you need just add up the watts of all the equipment and divide by 48V.

These converters have common negative ground (non-isolated) and can be used for common ground and floating ground installations.

DC-DC Converters	25 amp DC to DC battery charger
Part Number and Price	PSEC-7058 $1375
Country of origin	USA, NAFTA eligible
Nominal Input Voltage	24VDC
Input Voltage range	22 to 32 VDC
Max Input current at No Load	<360 mA (<12mA when remote is "off")
Output voltage	48V nominal, 55.2V actual for lead acid 58.4 for lithium iron phosphate 16 cell 58.8 for lithium ion 14 cell may be programmed at the factory for other cell counts and chemistries
Input current at full load	70 Amps
Max Output Current(s)	25 Amps
Max Output Power (continuous)	1500W resistive load
Output current limit?	Voltage reduction at current limit
Operating Temperature Range at 100% load	-40°C to +50°C Note: lithium batteries cannot safely be charged below zero degrees C
Temperature derating	Derate 1.5% per degree C over 40°C up to 60°C
Temperature shutdown	Over temperature shutdown, auto reset
Operating humidity	0-95% non condensing
Altitude	<6000 meters
Efficiency	>92 % at rated power
Load Regulation	<60mV
Switching frequency	kHz
Output ripple noise	<50 mV rms
Remote power on/off	Yes, through 24V terminal on control block, may be connected to a 24V ignition switch
Remote voltage sense	Yes. through two sense wires on the connector
Connections	DIN style terminal block
Protection	Low input voltage < 21.5 +/-0.3 VDC, resets at 23.5V High input voltage >17.0 +/- 1.0 VDC Over temperature by internal thermostat, self resetting Input reverse polarity by circuit breaker
Cooling	Through convection and the baseplate
Indicators	Two lights indicate Unit on, High charge, Float charge, Under voltage lockout, and Short circuit protected
Dimensions	17.8 x 6.9 x 3.6 inches 45 x 18 x 9 cm
Drawings	See below
Weight	8.2 kg (18 lbs)
Audible Noise	None
Warranty	2 years limited warranty for parts and labor

PSEC-7058 drawing:

drawing of the 850W DC converter showing dimensions

PSEC-649HS drawing

Heavy Duty, High Current Switchmode 24VDC / 48VDC Converters.

Wide input voltage range suitable for 24 Volt, 28 Volt systems.

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification