|
Custom design and manufacture of state-of-the-art battery chargers, UPS, and
power supplies for OEMs in a hurry!
| PST-TM12 PRODUCT IS NO
LONGER AVAILABLENiMH or NiCad charger |
| Quantity |
1-10 |
11-50 |
51-100 |
100+ |
| Price |
|
|
|
|
Car Adapter for the PST-TM12 |
PST-TA-1
|
|
|
|
| PST-TM12 4 to 12 Cell NiMH and NiCad pack Charger |
| |
|
| Battery Type |
Nickel Cadmium or Nickel Metal Hydride packs |
| Charge rate |
1 to 1.5 Amp peak |
| Pack Size |
100 mAH to 4000+ mAH, 4-12 Cells, autosensing |
| 4 cell detected |
4.8 volts nominal |
| 5 cells detected |
6.0 volts nominal |
| 6 cells detected |
7.2 volts nominal |
| 7 cells detected |
8.4 volts nominal |
| 8 cells detected |
9.6 volts nominal |
| 9 cells detected |
10.8 volts nominal |
| 10 cells detected |
12 volts nominal |
| 11 cells detected |
13.2 volts nominal |
| 12 cells detected |
14.4 volts nominal |
| Battery capacity |
70 mAH to 5000 mAH |
| Input Voltage |
100-120 VAC 50/60 Hz
(international, automobile or universal on request) |
| Adapter Voltage |
24 VDC 1 Amp |
| Algorithm |
dT/dt, requires a thermistor in the pack. The thermistor is connected between the
thermistor terminal and the negative terminal, 10k ohms at 25 degrees C, NTC. This is supplied
with the charger. |
| Size |
115 mm x 67 mm x 40 mm
4.5 x 2.6 x 1.6 inches |
| Weight |
120 grams, 4.2 oz, 0.26 pounds |
| AC Adapter |
wall plug-in, 1800 mm cord, connector 3.5mm OD x 1.3mm ID barrel |
Specifications:
 Input Voltage:
100-120 Vac, 50/60 Hz (universal input 90-260 50/60 available).
Output Voltage:
Up to 24 Vdc controlled by charger
Output current:
1.0 A max., controlled by charger
Temperature: -10 to +45° C, Operating -40 to +70° C,
non-Operating. Don't charge Nickel based cells if their temperature is below 0° or over
45° C.
Humidity: Indoor 90% R.H. @ 35° Celsius, Non-Condensing
|
