PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
April 17, 2023

12 Volt 150 Watt DIN Rail Backup Power Supplies

12 volt 150 watt power supply with battery backup
The PST-SP12-150 series of battery back up power supplies consist of a universal input (90 to 265 volts AC, 47 to 63 Hz, or 130 to 375VDC) 12 volt power supply with a DC Battery Backup feature and switch. It can charge any 12 volt SLA, gel cell, VRLA, or AGM lead acid battery and instantly switch over to battery power upon power failure with zero crossover time. These power supplies can be used with or without the battery as convenient DIN rail mount power supplies. The charge rate depends on the exact voltage that the power supply is set for, but can be up to 12A minus the load current.
12 volt and 24 volt DC UPS battery back up switching power supply
12V and 24V Volt Battery Backup Power Supply and DC UPS
24 volt 150w Din rail mount battery backup power supply
150 Watt 24V version
150 Watt 48V version

The battery voltage is not regulated, and the output during AC operation is the same as the battery charge voltage so the 12 volt system will vary from about 14 to 10 volts during battery operation. If battery back-up is not required there is pot for adjusting the power which is accessible from the front panel.

These units can also be used as high voltage input DC/DC converters with battery backup. The input voltage can be DC instead of AC if the supply voltage is between 130 to 375 VDC.
PST-SP12-150 12 volt, 150 Watt No longer available sorry
Click here for 12V 36W and 72W versions
MODEL PST-SP12-150
VOLTAGE 12V adjustable between about 10.8 Volts and 14 Volts
VOLTAGE WHEN USED WITH BATTERY BACKUP FUNCTION User must adjust the output voltage to 13 to 13.9 volts to ensure battery charging
VOLTAGE DURING BATTERY OPERATION 12.9 volts to 10 volts
Low Voltage Battery Cutoff? No
CURRENT 12A
CROSSOVER TIME zero crossover time
Connections Screw terminals, output on the top and input on the bottom
Screw terminal torque values 0.4-0.5 N-m
DIMENSIONS 71mm x 132mm x 117mm
WEIGHT 1000 grams, 2.2 lbs
INPUT VOLTAGE 90-265VAC or 130 - 375 VDC
SUPPLY FREQUENCY 47-63HZ
OUTPUT VOLTAGE TOLERANCE ±1%
MAX RIPPLE&NOISE <80mV PP
SWITCHING FREQUENCY ~130kHz
OPERATION TEMP -15~+70°C, derate 50% over 45°C
PROTECTIONS Short circuit, over temperature, output overvoltage,
EFFICIENCY >91% typical
POWER FACTOR 99% typical
BATTERY CHARGE CURRENT See table below
Certificates None at present
Use DIN-rails according to EN60715 or EN50022 with a height of 7.5 or 15mm  
ROHS ROHS available on special order
Overcurrent protection The power supply will continue to supply power up to 140% of rated current and then will go into "hiccough" mode, turning on briefly to check if the current is too high, then turn off again. During the "off" phase of the hiccough battery power is present.
LED Indicator LED is on when DC output is present

  • Universal input AC/DC switching power supply with DC UPS
  • DC Battery Backup, charges 12 volt lead acid battery and switches over to battery power upon power failure with zero crossover time
  • During Power Failure the battery voltage passes through without regulation
  • Output Voltage adjustment
  • Over Temperature Protection
  • Natural convection cooling, no fan
  • Over Current protection
  • High efficiency switching power supply with universal input and battery back up
  • The battery is external and can be sized to meet your backup needs
  • The battery is not included in the price, but can be obtained from PowerStream
  • Soft start

Mounting drawing of the PST-SP12-150 12V battery backup power supply


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

  1. 12 volt battery back up DC UPS, 12 volt battery back up DC UPS. Battery back up, Battery backup switchmode AC/DC power supply with universal input.

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification