February 27, 2024

12V 12A rapid battery chargers for lead acid, SLA, sealed lead acid, Gel, AGM and VRLA batteries.

Catalog of lead acid battery chargers 6V, 12V, 18V, 36V, 42V, 48V

12 volt 12 amp lead acid battery charger

This is a CE marked rapid 12 Volt battery charger for sealed lead acid batteries. It is are based on switchmode technology, which makes it more efficient, smaller, and lighter in weight than the old fashioned transformer chargers, and are microprocessor controlled to make them very accurate. They are good for all kinds of batteries, including flooded lead acid, and will prevent sulfation if used in battery-keeper mode. It is a simple to use, robust charger for use wherever 12V batteries are charged.
Charge lead acid, SLA, sealed lead acid, Gel, AGM and VRLA batteries.

Prices
PST-A200-12A lead acid battery charger with alligator cips		$94.00

PST-A200-12A 12V Lead-Acid Battery charger
	ITEM	UNIT	SPECIFICATION	REMARKS

01	Rated Input Voltage	VAC	100 or 240VAC 50/60Hz
03	Rated Input Current	A	3A rms	Measured with: INPUT:120V OUTPUT:Full load

05	Battery Charger Voltage Output	VDC	13.8V
06	Output voltage range	VDC	10VDC ~ 15VDC
07	Recommended Battery types		12V 20 ~ 180 Ah VRLA, SLA, Gel, Flooded, sealed lead acid	It will accurately charge any size lead acid battery, but for small batteries (<20AH) the charge indicator lights might not be accurate, and for large batteries (> 180AH) it will take a long time to charge.
08	Battery charger current	A	12A± 0.4A	This won't hurt your battery no matter what the battery manufacturer says is the maximum charge current, since this is a sophisticated, tightly regulated, multistage charger
09	Bulk Charging Voltage Limit	V	14.7V+-0.1V
10	Floating charge voltage limit	V	13.8V+-0.1V

13	Max. output power	W	150W
14	Typical charging time	hours	~4 hours	For 50Ah VRLA battery.
15	Ripple current	mA	300	Input: 230VAC Output: Full load
16	Charge Mode		Auto 4 stages	Soft start, constant current, constant voltage, float.
17	LED indicator		Red power light Red for charging, green for fully charged, red flashing for errors, black for no battery connected

18	Output Short Protection Output Reversed Polarity Protection		YES YES
19	Efficiency	%	83%	At max. load

20	Operating temperature	°C	-10 ~ +40	Full load & fan cooling
21	Operating humidity	%RH	< +90	Relative humidity, non-condensing.
22	Storage temperature	°C	-40 ~ +70
23	Storage humidity	%RH	0 ~ +95	Relative humidity, non-condensing.

24	Cooling		Natural convection and fan
25	Impact		1 meter drop test >= 3 times	Non-operating condition.

26	Weight		850g, 1.9 lbs
27	Size	mm	210X93X53 mm	Casing only

28	Input/Output Cord &Terminals		Input cord is an IEC-C14 C15 removable cord Output is a 5.5 x 2.1mm barrel connector.
Safety

Safety standards

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

12V Storage battery charger 12 amps, switchmode variety, 12V battery chargers

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification