August 2, 2022

4 Cell Lithium-Ion Battery Chargers 600 mA and universal AC input, 11.4V nominal, 16.8V peak

Lithium-Ion Battery Pack Charger catalog, 1 cell, 2 cell, 3 cell, 4 cell lithium ion and lithium polymer battery chargers

More Lithium Battery Chargers from PowerStream

4 amp off-the-shelf for 3 cell 10.8 volt lithium-ion, lithium-polymer battery packs

Lithium-Ion Battery single cell charger PST-3P10-L0504

Lithium-Ion and Lithium Polymer Battery Chargers for consumers and OEMs. No minimum order.

This battery charger is a microprocessor controlled unit designed exclusively for charging 14.4 V or 14.8 V lithium-ion or lithium-polymer battery packs. It has led indicators to indicate the current operating mode of the charger. This battery charger complies with applicable safety agency requirements of UL, cUL and CE.

PST-3P10-L1016

For charging 4 cell packs

$25.25

Quantity	1-10	11-50	51-100	101-300	301+
	$25.25	$20.00	$16.00	$14.80	$12.95

SDY-C53F (ZHJX002)

adapters with a barrel connector input and screw terminal output

For adapting the barrel connector version to screw terminals

$2.50 each

PST-WX12 ---- Output adapter barrel plug kit
plugset

Barrel Plug Adapters for PST-3P10-L1016

$7.00

Optional 18" alligator cord adapter

$3.25

PST-3P10-L1016 Li-ion Battery Charger for 4 cell packs
NO	ITEM	UNIT	SPECIFICATION	REMARK
INPUT	Rating Input Voltage	VAC	100~240Vac 50/60Hz
	Input voltage range	VAC	90~264Vac
	Rating Input Current	Amps	0.2A rms	Test conditions: INPUT:220V OUTPUT:Full load
	Max. input power	Watts	18 W
OUTPUT
	Rating output voltage	Volts DC	16.8V
	Output voltage range	Volts dc	12VDC ~ 17VDC
	Battery type		14.4V LI-ION
	Constant Charge current stage	A	0.6A ( ± 0.2A)
	Constant Voltage stage	V	16.8 ± 0.05
	Charge end current	A	<0.08
	Typical charge time	hour	5~6 hours	Test conditions: 1.8Ah Li-ion pack
	Max. output power	W	12W
	Hold-on time	ms	20
	Ripple current	mA	50	Test conditions: Input: 220Vac Output: Full load
	Charge finish conditions		V>16.5V + I<0.1A
	LED color		Red: charging Green: finish/idle
	Output short-circuit protect		Yes
	Efficiency	%	>76%	At max. load
Environment
	Operation temperature	·C	-10 ~ +40	Full load & natural convection.
	Operation humidity	%RH	< +90	Relative humidity, non-condensing.
	Storage temperature	·C	-40 ~ +70
	Storage humidity	%RH	0 ~ +95	Relative humidity, non-condensing.
	Cooling		Natural convection
	Vibration resistance		5MM/50HZ/600S	Non-operating condition.
	Impact resistance		1 meter drop test >= 3 times	Non-operating condition.
Mechanical
	Weight	g	150
	Size	mm	75 X 51 X 28	Casing only
	Connectors		5.5 x 2.1 mm barrel, others available on special order in quantity	Custom connectors available on special order
Safety
	Max. temperature rise	°C	< 40 on casing	At any line and Max. Load
	Safety standards		GB4943 UL1950 EN60950
	EMC standard		EN55022 B
	MTBF	hrs	30000
	Limited power source	VA	50
	ESD	kV	8.0
	Hi-Pot Insulation	V	i/p to o/p: 3000 (1 min.)	For complete unit, cut-off current =10mA

Twelve optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.

2.35 OD x 0.7 ID Barrel
3.0 OD x 1.1 ID Barrel
3.5 OD x 1.35 ID Barrel
4.0 OD x 1.7 ID Barrel
4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
5.0 mm OD x 3.5 mm ID with center pin
5.5 mm OD x 1.5 mm ID type 2 Barrel
5.5 mm OD x 2.5 mm ID Barrel
6.3 OD x 3.0 ID center pin Barrel
6.0 OD x 4.4 ID center pin Barrel
7.4 mm OD x 5.0 center pin ID Barrel
7.9 OD x 5.6 ID center pin Barrel

Specifications:

Input Voltage: 100 - 240 Vac, 50/60 Hz.

Output Voltage: Up to 16.8 Vdc controlled by charger

Output current: up to 0.6 A ±0.1 A max., controlled by charger

Temperature: -10 to +45° C, Operating -40 to +70° C, non-Operating

Humidity: Indoor 90% R.H. @ 35° Celsius, Non-Condensing

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

4 cell lithium ion and lipo battery pack charger, four cell lithium ion battery charger, 4 cell lithium polymer battery charger

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification