PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
April 17, 2023

Compact 3 Cell Lithium-Ion and li-poly Chargers 800 mA with UL approval

Lithium-Ion Battery Pack Charger 3 cell pack
More Lithium Battery Chargers from PowerStream
4 amp, 3 cell lithium ion charger
4 amp off-the-shelf for 3 cell 10.8 volt lithium-ion, lithium-polymer battery packs
Lithium-Ion Battery single cell charger PST-3P10-L0504
Lithium-Ion Battery Chargers for OEMs.
This microprocessor controlled battery charger is capable of for charging 3 cell 10.8 V or 11.1 V lithium-ion and lithium polymer (LiPo) battery packs. It has Underwriter Laboratory UL1950 approval and UL, cUL and CE marks. The peak voltage is 12.6V for this highly accurate lithium ion battery charger.
Quantity 1-10 11-50 51-100 101-300 301+
PST-3P10-L1012 For charging 3 cell Li packs $25.25
add_to_cart.gif
$21.00 $16.80 $15.10 $11.25
barrel connector alligator clip adapter Optional 18" alligator cord adapter $3.25
add_to_cart.gif
       
SDY-C53F (ZHJX002)
adapters with a barrel connector input and screw terminal output
For adapting the barrel connector output to screw terminals $2.50 each
add_to_cart.gif
       
PST-WX12 ---- Output adapter barrel plug kit
plugset
Barrel Plug Adapters for PST-3P10-L1012 $7.00
add_to_cart.gif
       

PST-3P10-L1012 Li-ion Battery Charger

     
 

ITEM

UNIT

SPECs

REMARKS

INPUT

       
 

Input Voltage

Volts AC

100 to 240VAC 50/60Hz

 
 

Input voltage range

Volts AC

90 to 264VAC

 
 

Input Current

Amps

0.2A rms

Under the following test conditions: INPUT:220V OUTPUT:Full load

 

Maximum input power

Watts

18

 

OUTPUT

       
 

Output voltage

Volts DC

12.6VDC

 
 

Output voltage compliance during charge

Volts DC

9VDC to 12.7VDC

 
 

Battery Chemistry

 

10.8V Lithium-ion or lithium polymer (LiPo)

 
 

Current during the constant-current charge phase

Amps

0.80 A (+0.2A)

 
 

Voltage during the constant-voltage charge phase

Volts

12.6VDC (+-0.15V)

 
 

Charge current at which the end-of-charge light comes on

Amps

<0.08 (80 milliamps)

 
 

Example of charge time for a specific battery pack.

hour

4 to 5 hours

Under the following test conditions: 1.8Ah Li-ion pack, 25°C

 

Maximum output power

Watts

12W

 
 

Hold-on time during power failure

milliseconds

20 ms

 
 

Ripple current

milliamps

50 mA

Under the following test conditions:

Input: 220VAC Output: Full load

 

The charge will terminate under the following conditions.

 

V>12.4V and I<0.1A

 
 

LED schedule

 

Red: charging

Green: finish/idle

 
 

Output short-circuit protect

·

Yes

 
 

Typical Efficiency

%

>76%

At maximum load

Environment

       
 

Operating temperature range

·C

-10 to +40

Full load & natural convection.

 

Operating humidity range

%RH

< +90

Relative humidity, non-condensing.

 

Storage temperature

°C

-40°C to +70°C

 
 

Storage humidity

%RH

0% to +95%

Relative humidity, non-condensing.

 

Cooling method

 

Natural convection

 
 

Vibration resistance

 

5mm deflection, 50Hz frequency, for 600 seconds

Under the following test conditions: Non-operating

 

Impact resistance

 

1 meter drop test 3 times or more

Under the following test conditions: Non-operating

Mechanical

       
 

Weight

grams

150g

 
 

Size

millimeters

75 X 51 X 28 mm

Not including the cords

 

Size

inches

3 x 2 x 1.1 in.

Not including the cords

 

Output Connectors

 

5.5 x 2.1 mm barrel, others available on special order in quantity

Also see the connector kit below

Safety

       
 

Agency approvals

 

cUL, CE

ROHS available by special order

 

Safety standards

 

GB4943 UL1950 EN60950

 
 

Maximum temperature increase above ambient

Degrees Centigrade

< 40°C on casing

At any line voltage within range and maximum output load

 

EMC standard

 

EN55022 B

 
 

MTBF

hrs

30000

 
 

ESD

kV

8.0

 
 

Hi-Pot Insulation

V

i/p to o/p: 3000 (1 min.)

 
 

Limited power source

VA

50

 
Twelve optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.
plugset
  • 2.35 OD x 0.7 ID Barrel
  • 3.0 OD x 1.1 ID Barrel
  • 3.5 OD x 1.35 ID Barrel
  • 4.0 OD x 1.7 ID Barrel
  • 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
  • 5.0 mm OD x 3.5 mm ID with center pin
  • 5.5 mm OD x 1.5 mm ID type 2 Barrel
  • 5.5 mm OD x 2.5 mm ID Barrel
  • 6.3 OD x 3.0 ID center pin Barrel
  • 6.0 OD x 4.4 ID center pin Barrel
  • 7.4 mm OD x 5.0 center pin ID Barrel
  • 7.9 OD x 5.6 ID center pin Barrel


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

3 cell lithium ion and li-po battery pack charger, 10.8 volt charger, 10.8V lithium ion charger, 3 cell charger, three cell lithium polymer charger.

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification